Can the FC-A102E/M fingerprint and time attendance access controller be managed by your company's cloud platform, and how do I need to operate it? Please provide the following instructions.
Hello, welcome to use our products, thank you for your support. The FC-A102E/M fingerprint and time attendance access controller can be managed through the cloud system, first of all, we need to make sure that the device FC-A102E/M has been connected to the external network, in the ‘access control’ menu of the cloud platform’s ‘access control’ module, click "Install" (pictured), use the "Setup Tool" on the installation interface to set the server address and port of the face recognition access controller (pictured), after the setting is complete, return to the installation interface, enter the 16-bit sn code of the device, and click ' OK', after modifying the corresponding parameters, click 'install' to complete the installation.
In the ‘Personnel Information’ menu in the ‘Personnel’ module, click on ‘Add’ (pictured) to edit and enter the personnel information and fingerprint information, after the entry is complete, click on ‘OK’ to complete the addition of the personnel file.
Finally, in the ‘Access level Authorization’ menu in the ‘Access Control’ module, select the person who needs to authorize the face access level to the right frame and click on ‘Next’
Select the door device that needs authorization (access controller, face recognition access controller, fingerprint recognition access controller, etc.), after selecting, click "Allow selected personnel to pass through the selected door", wait for about one minute, and upload is successful.
