FC-8920A is configured to TCP mixed mode problem
2017-04-26 15:13
Details of the problem:
After FC-8920A is configured in TCP mixed mode, there is no connection to the configured server IP and port, how to debug?
Expert answer:
Hello! Thanks for using our company's products! You can use a computer to directly connect to the control board, the factory default address of our company's access control board is 192.168.1.150, the IP address of your computer must also be in the same network segment as the control board. After you open the FCARD3500 software, click "Automatic Search Device" under "Install Device", and after you find the access control board with IP address 192.168.1.150, you can modify the IP address as needed, and then click "Install Device".
